Derby
Derby is a popular wood frame style with a flat profile face that is 1 ¼” wide. It’s made from a North American hardwood (Poplar) that’s finger-jointed and finished with a decorative wood pattern wrap. This eco-friendly approach allows us to ship sturdy, high-quality, consistently colored and patterned natural wood frames. Available colors listed under each product. Made in America
Thickness : 1 ¼”
Material : North American hardwood (Poplar)
Joint : Fingerjoint
Made in : America
Ashford
The Ashford is a thin metal frame style, with a flat profile face that is ⅜” wide. It’s made from extruded aluminum that’s either anodized or powder coated (processes to create a decorative, durable, and corrosion-resistant finish). Available colors listed under each product. Made in America.
Thickness : ⅜”
Material : Anodized Extruded Aluminum
Joint : -
Made in : America
Granby
The Granby is an ornate wood frame style with a flat profile face 1 ⅜” wide. It’s made from a North American hardwood (Poplar) that’s finger jointed, decoratively pressed, and finished with an antique-style gilded pattern wrap. Made in America.
Thickness : 1 ⅜”
Material : North American hardwood (Poplar)
Joint : Fingerjoint
Made in : America
Metal Frame Hanging Hardware
included with each order
Euro Hangers
Euro Hangers are what keeps your hanging wire in place. They fasten to the back of the frame, and hanging wire should be strung tight through each side to ensure an even display. You should also ensure that your Euro Hangers are placed evenly on both sides of the frame.
Hanging Wire
Hanging Wire holds your frame to the hook that is on the wall. It should be taut in between both Euro Hangers, and it should be placed on a hook until the frame looks even.
Spring Clips
Spring Clips ensure there is no space for your backing to move in the frame. Without them, there would be a slight bit of wiggle room for the frame’s contents to move around, and we want to make sure it stays snug. Simply place some pressure on the spring clips into the back of the frame to flatten them out, and this will remedy that issue. (Just be careful as if you let go without them being fully under the frame rail, they could spring out!)
Bumpers
Bumpers are meant to protect your wall more than your frame. Put the bumpers on the back corners of the metal frame to preserve your wall just as well as the frame you have preserves your artwork. (Note: sometimes these might be white foam squares instead of clear circles, but both are used the same and serve the same purpose.)
Corner Brackets
Corner Brackets are what keep your metal frame together. As the name suggests, they are on the corners of your frame, and you can simply loosen or tighten to disassemble or assemble the frame. Something to note, however: You don’t need to remove the corner brackets entirely to loosen a frame rail. All you need to do is loosen them a little bit, about a half turn.
Hook & Nail
Hook is what you mount on the wall for the frame to hang off of. Just make sure everything is level, and you should have a great display!
Nail is what holds your hook in place on the wall. All you need to do is make sure you’ve found the perfect spot to hang your frame, and then hammer the nail through the hole on the hook; you should be all set from there.
Wood Frame Hanging Hardware
included with each order
D-Rings & Hanging Wire
D-Rings are the wood frame counterpart to Euro Hangers. They perform the same purpose, but for a different material. They come pre-fastened to the wood frame, since they are screwed directly into the frame profile.
Hanging Wire used for wood frames is the same as the wire used for metal frames. The hanging wire comes pre-attached to the D-Rings, with one side untethered so you can easily remove the backing of your frame and place your artwork into it.
Flexipoint Tabs & Felt Pads
Flexipoint Tabs come included on the back of our wood frames and are meant to be bent back to remove the backing from your frame, and then pushed back into place again once everything is placed in properly. These perform the same function as spring clips do for metal frames— keep everything in place and ensure nothing inside the frame can move or shake around.
Felt Pads are added to the wood frame corners to protect your wall.
Wall Buddies
Wall Buddies are for our larger wood frames to prevent them from bowing over time. (If you use hanging wire on a larger wood frame, the final product might warp and bow after a few months.) The Hanging Brackets are similar to sawtooth hangers— for those of you who may have prior knowledge of framing— these are placed on the corners of the frame, then attached to the nails & hooks.